I’ve not forgotten the whole lost films project, just that I think we’re pretty much there bar a few C41 films I’ve not posted, and maybe the slide films (I know I posted one of those early on). This one needed complete ID, I had NO idea of where it was – thought it was Warwick for a long time. Enter Google Image Search, which amazingly ID’d the lump of stones as Tynemouth Priory – I wasn’t expecting that. Then I managed to date it exactly because while we were there jousting was happening…a quick Google search brings up the local paper article about the event – which pegs it exactly to July 11th 2004 – because I remember we visited on the Sunday.
There’s a disused fort and a gun enplacement right by the Priory, and a graveyard. The weather was as stormy as it looked, a typical English summer’s day!
I like this shot, seems to have a real Military Complex, Church and State, Army and Death thing going on. But they were that close to each other, with a jousting contest going on around the corner. It was rather odd, actually.
I loved the fact the older gravestones were literally melting cos of the weather erosion:
These were a complete pig (or something rather more stronger) to export and edit…somehow, and I think this is a Lightroom 4 bug, they would not export and kept creating an ‘unknown error’, and even when editing them I’d get ‘This photo cannot be edited due to an unknown error’. They are fine in Preview and LR 3.6 (and still fine, I went back to LR 3.6 and re-exported them as DNGs – did not fix it sadly) and I tried taking all metadata out, exporting as other formats, nothing.
So to keep all my settings I had to download Camera RAW 6.7 beta and export them one by one, partly because Photoshop CS5 wouldn’t open more than one PV2012 image without freezing/crashing, so I couldn’t batch them. Again, it’s fine with other RAW images, be they PV 2010 or previous, or TIFFs and NEFs etc. This all points to a serious problem with Process Version 2012 or a nasty metadata compatibility somewhere, but the common feature seems to be PV2012.
So -1 to Lightroom – I think there is a bug in Process Version 2012 that they’re not talking about, because I’ve had this happen to new scanned TIFFs that haven’t been touched by LR 3.6 (previously I thought it was some import failure)…thankfully in that case a removal and re-import seemed to fix it…. and converting back to PV 2010 seemed to fix the issue. Adobe’s forums are full of people having problems like this from the Beta version, as someone who didn’t install the beta but installed the ‘final’ version over a paid-for download I think there’s a more serious issue here.
Lightroom 4 does kick out these strange ‘Image cannot be edited due to an Unknown Error’ sometimes, usually on large TIFF scans, but I’ve not been doing that much photography so I dont know if that will have the same problem (this is now changing because with the light and BST I’m now doing my cliffwalks again). But usually switching to another file and or closing and restarting solves that temporarily, this was the first time it was regularly happening with the same batch of images, and wouldn’t let me export them at all.
I would say: keep your LR 3.6 and 4 catalogues separate for the moment if you can, and don’t uninstall previous versions. And hope Adobe ‘solve’ this in a update. Disappointing since I now prefer PV 2012 for editing, and I can see the quality change side-by-side (and below). It’s far better…IF you files don’t get ‘corrupted’ or an ‘unknown error’. 😦
Back to the photos: we visited Newcastle & Gateshead for a weekend in July 2004 so this all fits…on another film, one of the C41 Kodak C400CN films, we have shots of Newcastle…love the Tyne Bridge shots:
Just updated to Lightroom 4, and you can see the difference below as I redid one of my medium format images with the new ‘Process Version 2012’. Warning: on problem images it does tend to screw up your converted LR3 2010 pictures somewhat, coming out really light. It seems big changes in Contrast and the introduction of Highlights, Shadows and Whites sliders and changes with Clarity means if you have a photo using a lot of those (say a dark underexposed image, or with a lot of haze/flare) you might need to tweak it quite a lot – but my other more standard images hardly changed at all – the shot of Kirk for instance the auto-tone and the skin tones looked far more pleasing.
One good thing though is you’re given the option to view Before/After and can edit your image to match the previous Process Version, so it’s quite a quick process unless you have quite a ‘challenging’ image, in which case unless you feel there is something in the new Process Version you want, I’d leave old images be. What I found though is those old images looked rather odd in the old PV2010 in 4, they looked overexposed/light as if the brightness was turned up too high, so I’m not sure how good the claim is that your old images stay as they are…that’s the theory, but it seems a bit of a one-way upgrade so if you’ve got images you’re editing I’d recommend you finish and export them in LR3 before moving to LR4 and accept some of them will ‘shift’ and lighten.
The spotting is far faster – it tends to drag on the massive medium format scans in LR3, only slightly in LR4 as you click, then you can add another, speeding up the process no end. Also the gamut has been tweaked so highlights don’t blow so easily and it seems a softer curves at the higher end, leading to more pleasing skin in portrait shots.
Something strange when I first imported the catalog it took closing and reopening the program and some time before the previews showed (maybe they’re being ‘converted’ but there wasn’t an indicator for that, although it said it would), so if you get ‘no images found’ in Develop module try restarting the program, or opening up LR3, closing it down, then opening LR4, that seemed to do it.
I’ve also used the white balance temp/tint function on the mask brush – it’s great for when you have mixed lighting or the shift in colour due to being too close or too far away from the flash, noticed that bringing underexposed areas the colours tend to have a red bias (and too close a greenish tinge?) – this slider will help you balance the colours.
Check it out – here you can see the new PV 2012 image and to compare you can see the original JPG of the PV2010 version three posts below…it took more work to get ‘back’ to this state, but I do prefer it, the higher-range tones looks much more natural and less contrasty and highlights seem less likely to ‘blow’ – and better Clarity results although now needs to be more lightly applied :
There also seemed to be far less obvious ‘noise’ (look at the black jacket, the white bits are on the image, less prominent in the LR4 version) and colour seemed less likely to go to vivid when you turned up the contrast – this was slightly annoying actually as I liked the more saturated look so I had to play with Vibrance and Saturation, but it’s good news if you have images like this which usually when you turn up the Exposure gain and contrast things used to get a little day-glo. Opposite seems to be true now, it seems to err on the other side of neutral.
And here you see the original scan – ugh indeed. That’s the magic of the tools in Lightroom and also a decent colour negative scanner (transparency might be a different story) you can get something out of a failed negative like this (what happened is I was trying to bounce light from behind, I now know I probably should have put a small flash in front, or put large reflectors closer – the balancing in this high key soft type shot, something that’s used a lot in fashion, is very hard.
Not tried the other features in LR4 – import seems a LOT faster, though…but looking forward to reverse geoencoding using GPX Logger on my Android phone and using the new Map feature where you can sync a GPX file to a set of pictures so you can use any camera and don’t need an expensive device trailing a cable off your camera to tag the GPS location – yes that’s more accurate but it’s the hassle of having wires I don’t want…and this is free!